LGC AXIO Proficiency Testing | Water, Environmental and Pharmaceutical Highlights
Proficiency Testing is a key requirement for accreditation to ISO/IEC 17025. For the past 40 years, we’ve been leveraging our technical expertise and influence to drive the future of PT and quality assurance. We provide proficiency testing programmes with localised support across a global network - to over 13,000 laboratories in more than 160 countries.
Through our secure, multi-functional web-based reporting system PORTAL, managers can monitor the performance of multiple laboratories in a wide range of geographies through group participation and reporting.
See below some Supelco equivalent samples we have available:
Air
Many modern activities create air pollutants with known, or suspected, harmful effects on human health and the environment. We developed the LGC AXIO Air and Stack Emissions Scheme (AIR) in partnership with HSE, combining our scientific and production expertise in air monitoring.
Participating in AIR supports your laboratory’s quality system by providing external and independent assessment of your performance in conducting specific tests or measurements.
Samples:
Metals 25mm spiked membrane filters
PT-AR-01
Sulfur dioxide
PT-AR-34
Ammonia
PT-AR-37
Anions on filters
PT-AR-14
Mercury
PT-AR-31
Metals
PT-AR-33
Chromium VI
PT-AR-09
Soil
Land contamination – from sources including industrial waste, oil and fuel dumping, domestic pollution, pesticides, landfills, and leaking storage tanks – poses serious environmental and human health risks.
By joining our CONTEST Proficiency Testing Scheme, we can help support your laboratory’s performance in testing for a wide range of metallic, organic, and inorganic analytes in real-world soil and leachate samples.
Samples:
Group A Metals
PT-CN-A01A
VOCs in Soil
PT-CN-25
Group C Soil
PT-CN-C03C
Group B Soil
PT-CN-B03B
Leachate
PT-CN-D
Metals Reduced participation Soil only
PT-CN-ARED
Organochlorine Pesticides in Soil
PT-CN-26
Group C Phenol
PT-CN-C07B
Group B Total Cyanide
PT-CN-B06
Water
Each water source requires regular analysis to determine its safety and suitability for use. LGC AXIO’s Water Chemistry Scheme (AQUACHECK) is one of the longest running Proficiency Testing schemes in the industry.
Whether you’re looking for analytes in potable, ground, waste or marine water, our schemes have you covered, assuring quality in all your testing results.
Samples:
Non specific analytes
PT-AQ-03
Oil and grease in water
PT-AQ-24
Mineral oil in water
PT-AQ-23
Nutrients and others
PT-AQ-10
Free Chlorine in Waste Water
PT-AQ-69
VOCs Fumigants in Groundwater
PT-AQ-55
Non specific analytes
PT-AQ-11
Sulfide
PT-AQ-32
Settleable Solids
PT-AQ-15
Polychlorinated biphenyls
PT-AQ-15 PT-AQ-19D
Chromium VI
PT-AQ-12C
Metals Preserved in 0 5 Nitric Acid
PT-AQ-12
Polycyclic aromatic hydrocarbon
PT-AQ-19C
Phenols
PT-AQ-06B
Formaldehyde
PT-AQ-28
Chlorophyll a
PT-AQ-33
Taste and odour
PT-AQ-36
Acid Herbicides
PT-AQ-08
Inorganic Disinfection By products
PT-AQ-03A
Organophosphorus Pesticides
PT-AQ-09
Organochlorine Pesticides
PT-AQ-07A
Chromium VI
PT-AQ-05C
Synthetic Pyrethroid Insecticides
PT-AQ-51
Polychorinated biphenyls
PT-AQ-07D
Polycyclic Aromatic Hydrocarbons
PT-AQ-07C
Organophosphorus pesticides
PT-AQ-21
Major wastewater analytes
PT-AQ-17A
Ecotoxicology
PT-AQ-50
Benzene Toluene and Xylenes
PT-AQ-06C
Saline Water Metals
PT-AQ-62
Organochlorine Pesticides
PT-AQ-19A
Saline Water Nutrients
PT-AQ-61
Water framework directive sample I
PT-AQ-34I
Metals Preserved in 0 5 Nitric Acid
PT-AQ-17C
Acid herbicides
PT-AQ-20
Free Chlorine
PT-AQ-03B
Major Ions Higher salinity potable water
PT-AQ-01A
Microbiology
The Water Microbiology Scheme (QWAS) from LGC AXIO Proficiency Testing is the world’s largest water microbiology programme, trusted by more than 1,000 participating laboratories globally.
Established in 2002, it offers a comprehensive choice of samples – aimed at potable, process, mineral, effluent sludge, industrial, surface, recreational, sea, dialysis and waste waters, with testing for E. coli, Legionella, Streptococcus and more.
Samples:
Microorganisms Enumeration Mineral water
PT-WT-420
Clostridium Pseudomonas Potable Water
PT-WT-413
Legionella pneumophila Industrial water
PT-WT-417
Microorganisms Sea Water
PT-WT-422
Pharma
The AXIO PHARMASSURE scheme is designed to ensure that pharmaceutical testing laboratories are producing analytical data which is fully compliant with wide-ranging global requirements for pharmaceutical preparations, dietary supplements, multivitamins, E-liquids and medicinal herbs.
Our samples cover a wide variety of analytical techniques and provide a comprehensive selection of chemical and microbiological analytes, from arsenic and residual solvents to S. aureus, endotoxins and E. coli.
Samples:
Moisture by Karl Fischer
PT-PH-06F
Loss on drying LOD
PT-PH-06D
HPLC analysis
PT-PH-02A
Residue on Ignition
PT-PH-06M
Basic chemical testing
PT-PH-01
Yeast mould and Pseudomonas Enumeration
PT-PH-04B
Conductivity in solutions
PT-PH-08A
Residual solvents
PT-PH-02E
FTIR
PT-PH-06E