Other moulds
For samples with little precipitation volume of iron-, nickel- and cobalt base. Samples are cut 15mm from bottom and grinded for analytical surface. Sample dimension: 75 x 32-45 mm Ø | |
For samples with little precipitation volume of iron-, nickel, cobalt base and pure metals. No cutting necessary. Samples are grinded, milled or lathed from bottom. Sample dimension: 20 x 40 mm | |
Samples are prepared for analytical surface from the side, either grinded, milled or lathed. Sample dimension: 20 x 40 x 40 mm | |
For pig iron and cast iron with asymmetrical feeder. The feeder is cut off and the sample surface prepared from the bottom by use of a swing grinder. Sample dimension: 4 x 40 mm Ø | |
For cast iron with special high carbon equivalent as per pin sample method. Sample dimension: 40 x 6 mm Ø | |
For samples with high precipitation volume and tendency for segregation, non-ferrous-alloys. The feeder is cut off and the sample surfaced by milling or grinding from the bottom. Sample dimension: 6 x 45 mm Ø | |
Mould tongs for cast iron samples, copper insert moulds available as spare parts. Sample dimension: 4 x 36 mm Ø |